undefined
+
  • undefined

Multi-functional Rapid Poison Screening and Removal Device

Current model: SSK/NW-CI23


The multi‑functional post‑toxicity rapid screening and clearance device is a fast‑testing system developed and manufactured to detect abnormal brain magnetic flux caused by elevated dopamine levels in the human body, as measured by SQUID sensors. The MEG drug‑screening rapid detector eliminates consumable waste and features simple operation: after powering on, connect the finger clip to the main unit; the test subject places the clip on their middle finger, and the SQUID sensor at the front of the rapid‑testing unit is gently pressed against the subject’s forehead for 7–12 seconds to deliver results, determining whether the individual has used drugs or prohibited substances.

Retail price

Market price


The multi‑functional post‑toxicity rapid screening and clearance device is a fast‑testing system developed and manufactured to detect abnormal brain magnetic flux caused by elevated dopamine levels in the human body, as measured by SQUID sensors. The MEG drug‑screening rapid detector eliminates consumable waste and features simple operation: after powering on, connect the finger clip to the main unit; the test subject places the clip on their middle finger, and the SQUID sensor at the front of the rapid‑testing unit is gently pressed against the subject’s forehead for 7–12 seconds to deliver results, determining whether the individual has used drugs or prohibited substances.
Quantity
-
+

Remaining inventory

隐藏域元素占位


Equipment Overview

The multifunctional post‑intoxication rapid screening and clearance device is a fast‑testing system developed and manufactured to detect abnormal brain magnetic flux caused by elevated dopamine levels in the human body, as measured by SQUID sensors.

The MEG rapid drug‑testing device eliminates consumable waste and is easy to operate: after powering on, simply attach the finger clip to the main unit; the test subject places the clip on their middle finger, and the SQUID sensor at the front of the device is gently pressed against the subject’s forehead for 7–12 seconds to deliver results, determining whether the individual has used drugs or prohibited substances.

 

Device Features

It’s easy to operate, enabling rapid screening of intoxicated individuals anytime, anywhere; each test takes only 8–15 seconds to produce results.

No consumables are required, and data acquisition is straightforward: a magnetoencephalogram can be recorded from within 1 cm of the forehead. The entire recording process does not involve any other invasive biological samples.

Built-in polymer lithium battery, ideal for mobile inspection and law enforcement.

Equipped with second-generation ID card recognition functionality;

Equipped with document verification and facial recognition capabilities;

Supports 4G, 5G, and Wi‑Fi connectivity;

Supports standalone operation as well as multi-device online networking; enables local storage and remote cloud upload; provides remote integrated platform management; and supports blacklist configuration and regulatory filing.

 

Application

Rapid screening of personnel in special venues, mobile law enforcement by public security authorities, on-site rapid drug testing and screening in schools, hospitals, and during routine inspections; as well as random sampling, oversight, and routine inspections conducted by drug rehabilitation management agencies.

 

Parameter Configuration

 

Multi-functional Rapid Poison Screening and Removal Device

Processor speed

8 Nuclear 2.0 GHz

Screen size

5.0 Inch screen

Screen resolution

1280*720

Touch screen

Multi-touch, Corning third-generation glass tempered screen

Camera

Front-mounted 5.0MP

Rear-mounted 13MP , Autofocus with flash

Microphone head

Built-in 8 Omega /0.8W Waterproof speaker x 1

Speaker

Built-in   Sensitivity: -42 dB, Output impedance 2.2k Omega

Biometric Module

Resolution

24bit

RMS Noise

<1µV ( 0.1-100Hz )

Input range

-150 mV To +150 mV

Input impedance

>1 G Omega

Common-mode rejection ratio CMRR

( @50-60Hz ) :100dB

Sampling rate

4096/2048/1024/512 or 4000/2000/1000/500 Hz

Analog bandwidth

4kHz Time DC To 800 Hz

Second-generation ID card reading module

Standards and specifications

Compliant with ISO/IEC 14443 Type B Standards, as well as “ GA450-2013 General Technical Requirements for Desktop Resident Identity Card Readers,

《 GA467 Technical Specification for the Interface of the Security Control Module for Resident Identity Card Verification, GA/T1011-2012 Resident ID card fingerprint collection

General Technical Requirements for Collectors

Card reading time

<1s

Reading distance

0-30mm

Effective Collection Window

15.2*20.3mm

Image size

300*400 pixels

Image resolution

500 dpi

Operating frequency

13.56MHZ ± 7KHZ ( fc )

Antenna energy

Electromagnetic Field Strength on the Antenna Surface (Hmx ) ≤ 7.5 A/m rms; Electromagnetic field strength at the maximum reading distance in the direction of the antenna’s surface normal.

(Hmh) ≥ 1.5 A/m rms 。

Fingerprint sensor

Collection method

High precision ADC Collection

Image Acquisition Time   

≤ 160 ms

Resolution

508 DPI

Collection window size

13.85mm × 18.90mm

Effective Collection Area

12.8mm × 18.0mm

Image size

256  × 360 pixel

Interface sensor

Gravity sensing

Built-in

Gyroscope

Built-in

Compass

Built-in

Proximity sensing

Built-in

Light sensitivity

Built-in

Wi-Fi

WIFI 802.11(a/b/g/n) Frequency 2.4G+5.8G Dual-band Wi-Fi

Bluetooth   BT

4.0(BLE)class1.5 Transmission distance :10m

4G/5G

GSM 、 WCDMA 、TD-SCDMA、LTE-FDD、LTE-TDD , All-Network Compatible

GPS/BDS

GPS 、 BD Choose any

Machine interface

SIM Interface, TF Memory card slot, USB 3.0 , standard headphone jack, PogoPin 、TYPE-C Charging

External power supply

DC 5V Maximum current 1.5A

Physical parameters

Operating ambient temperature

-40 °℃~ +60 °C

Storage temperature

-45 °C~ +70 °C

Operating humidity

Humidity less than 90%( No condensation )

Power supply

Built-in lithium battery 3.7V/5000mAh

Battery life

Approximately 8 Hours (standby time > 300h )

Appearance dimensions

178*83*24.6mm

Weight

Approximately 1200g

Equipped with accessories

Finger clip sensor

Collect finger data

Data Transmission Foundation

Supports charging and data transfer

Charging data cable

USB Turn type-c

Charging plug

American standard / European standard

Instruction manual

A copy

Packaging

ABS Dedicated protective case (dimensions 380mm*220mm*120mm )

 

Click to view more Click to close more

Standard Package Contents

Content update in progress,...


Upon unpacking and use, the standard package includes the above accessories.

Inquiry about this product?

Obtain relevant technical support

Inquiry about this product?

Obtain relevant technical support

Contact Sales

We respect your privacy, and the information you submit will be used solely for this business communication.
We respect your privacy. The information submitted will only be used for this business inquiry.

Quick Contact

Quick contact

sales@settall.com

13001168699

Image Name

Download Materials

Data download

Related Videos

Related Videos