undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined

Multi-functional Rapid Poison Screening and Elimination Device

Current model: SSK/NW-CI


The multifunctional post-toxicity rapid screening and clearance device is a fast-testing product developed and manufactured for individuals suspected of drug use. It operates by measuring abnormalities in cerebral magnetic flux caused by excessive dopamine levels, as detected via SQUID sensors. The MEG rapid drug-screening device eliminates consumable waste and features simple operation: after powering on, connect the finger clip to the main unit; the subject places the clip on their middle finger. The SQUID sensor at the front of the screening unit is then gently placed against the subject’s forehead for 7–12 seconds to obtain test results, determining whether the individual has used drugs or prohibited substances.

Retail price

Market price


The multifunctional post-toxicity rapid screening and clearance device is a fast-testing product developed and manufactured for individuals suspected of drug use. It operates by measuring abnormalities in cerebral magnetic flux caused by excessive dopamine levels, as detected via SQUID sensors. The MEG rapid drug-screening device eliminates consumable waste and features simple operation: after powering on, connect the finger clip to the main unit; the subject places the clip on their middle finger. The SQUID sensor at the front of the screening unit is then gently placed against the subject’s forehead for 7–12 seconds to obtain test results, determining whether the individual has used drugs or prohibited substances.

The MEG rapid drug screening device eliminates consumable waste and is easy to operate: after powering on, connect the finger clip to the main unit; the test subject places the clip on their middle finger. Simply press the SQUID sensor at the front of the rapid screening unit against the subject’s forehead for 7–12 seconds to obtain results and determine whether they have used drugs or prohibited substances.

Watch more related videos
Quantity
-
+

Remaining inventory

隐藏域元素占位


8–15 sReported screening time per person
No routine consumablesNo test strips or cards required
Non-invasive acquisitionNo urine or saliva samples required
4G / 5G / Wi-FiData upload and platform management

Product overview

Portable Preliminary Drug-Use Screening Device

The SSK/NW-CI uses a SQUID sensor system with a fingertip clip and a forehead sensor to collect signals for on-site preliminary screening. The clip is worn on the middle finger while the device's front sensor is positioned near the forehead.

The device requires no routine test strips or cards. It is designed for field screening, identity association and recordkeeping in mobile law enforcement, designated facilities, schools, hospitals, field inspections and drug rehabilitation programs.

Signal acquisitionMiddle-finger clip and forehead sensor
Identity associationSecond-generation Chinese ID cards, fingerprints and facial images
Screening recordsLocal storage, remote upload and management of multiple devices

Portable preliminary drug-use screening device

Non-invasive screening with identity association and local records

Core capabilities

Core capabilities for consecutive screenings

The device combines rapid screening, non-invasive signal acquisition, mobile deployment and record management.

Rapid screening

The manual lists a screening time of approximately 8–15 seconds per person for consecutive on-site screenings.

No routine consumables

Routine screening requires no disposable test strips or cards.

Non-invasive acquisition

The workflow requires no biological samples such as urine or saliva.

Identity association

Capture ID card, fingerprint and facial information and associate it with a screening record.

Mobile deployment

A built-in lithium battery supports mobile inspections and field use.

Connectivity and platform management

Supports 4G, 5G, Wi-Fi, multiple-device networking, cloud uploads and watchlist recordkeeping.

Screening workflow

Four-step field screening workflow

The workflow runs from fitting the fingertip clip to displaying the preliminary result.

佩戴指夹

01

Fit the fingertip clip

Place the device's fingertip clip on the subject's middle finger.

额部检测

02

Forehead screening

Place the sensor lightly against the forehead. The device runs the screening automatically.

数据采集

03

Signal acquisition

The system collects and analyzes signals automatically.

结果显示

04

View the result

The device displays the preliminary screening result on screen.

Application scenarios

Typical applications

Designed for field screening in mobile law enforcement, designated facilities and programs that require identity association.

Mobile law enforcement

Supports rapid field screening and association with identity records.

Screening at designated facilities

Supports rapid screening and recordkeeping at designated facilities.

Schools

Intended for on-site screening in school settings.

Hospitals

Intended to support preliminary screening in hospital settings.

Field inspections

Supports mobile inspections and consecutive on-site screenings.

Drug rehabilitation programs

Supports spot checks, oversight and recordkeeping in rehabilitation programs.

Comparison

Comparison with conventional rapid drug screening

Compare screening time, sample collection and digital record management.

Screening time and method

FeatureSSK/NW-CIConventional rapid screening
Screening methodForehead sensor screeningUrine or saliva sampling
Time per person8–15 sTypically several minutes
Disposable consumablesNo routine consumablesTest strips or cards required
Sample collectionNo urine or saliva collectionBiological sample required

Digital records and management

FeatureSSK/NW-CIConventional rapid screening
Identity captureSecond-generation ID card, fingerprint and facial dataTypically unavailable
Record storageLocal storageOften recorded manually
Network access4G / 5G / Wi-FiTypically requires separate equipment
Platform managementMultiple-device networking and cloud uploadTypically requires a separate system

Technical specifications

Technical specifications

Specifications are based on the product manual. Microphone and speaker values follow the corrected product specification.

Main unit and display

ProcessorOcta-core, 2.0 GHz
Display5.0-inch, 1280 × 720, multi-touch, with Corning Grade 3 tempered glass
Front camera5 MP
Rear camera13 MP, autofocus, with flash
MicrophoneSensitivity −42 dB, output impedance 2.2 kΩ
SpeakerOne built-in 8 Ω, 0.8 W waterproof speaker

Signal acquisition and identification

Resolution24-bit
RMS noise<1 µV (0.1–100 Hz)
Input range and impedance−150 to +150 mV, input impedance >1 GΩ
Common-mode rejection ratio100 dB at 50–60 Hz
Sampling rate4,096/2,048/1,024/512 Hz or 4,000/2,000/1,000/500 Hz
Analog bandwidthDC to 800 Hz at 4 kHz

ID card and fingerprint modules

Second-generation ID card standardsISO/IEC 14443 Type B, compliant with GA450-2013, GA467 and GA/T1011-2012
Card read time<1 s
Card reading distance0–30 mm
ID card capture window15.2 × 20.3 mm, 300 × 400 pixels, 500 dpi
Fingerprint captureHigh-precision ADC, capture time ≤160 ms, 508 dpi
Fingerprint sensor area13.85 × 18.90 mm, active area 12.8 × 18.0 mm, 256 × 360 pixels

Communications, interfaces and sensors

Wi-Fi802.11 a/b/g/n, dual-band 2.4 and 5.8 GHz
BluetoothBluetooth 4.0 BLE, approximately 10 m transmission range
Mobile networksGSM, WCDMA, TD-SCDMA, LTE-FDD and LTE-TDD, with multi-network support
PositioningOptional GPS or BeiDou
SensorsGravity, gyroscope, compass, proximity and ambient light
InterfacesSIM, microSD, USB 3.0, headset jack, pogo pins and USB-C

Environment, power and construction

Operating temperature−40 to +60 °C
Storage temperature−45 to +70 °C
Operating humidity<90% RH, non-condensing
BatteryBuilt-in lithium battery, 3.7 V / 5,000 mAh
Battery lifeApproximately 8 h of operation and >300 h on standby
External power5 V DC, 1.5 A maximum

Standards and configuration

Dimensions178 × 83 × 24.6 mm
WeightApproximately 1,200 g
Operating frequency13.56 MHz ± 7 kHz (fc)
Antenna field strengthSurface Hmx ≤7.5 A/m RMS. At maximum read distance, Hmh ≥1.5 A/m RMS.
Intended useOn-site preliminary screening and assessment support
ConfigurationCommunications, positioning and identity modules are subject to the final technical agreement

This page follows the product manual. The agreed technical documentation and delivery list govern the final configuration, interfaces and accessories.

Standard package

Standard package

The package includes the main unit, signal acquisition, charging, data transfer and carrying accessories for field deployment.

SSK/NW-CI main unit

Fingertip clip sensor

Data transfer dock

USB-to-USB-C charging and data cable with power plug

User manual

ABS protective case, 380 × 220 × 120 mm

FAQ

Frequently asked questions

How long does on-site screening take per person?

The manual lists approximately 8–15 seconds to display a screening result. Identity registration and site procedures also affect the total time.

Are urine, saliva or disposable test strips required?

The fingertip clip and forehead sensor collect signals without routine urine or saliva sampling. Test strips and screening cards are unnecessary for this workflow.

Can screening records be linked to an identity?

The device can collect second-generation Chinese ID card, fingerprint and facial data and associate them with a screening record, depending on the supplied configuration.

Does the device support networking and remote management?

It supports 4G, 5G, dual-band Wi-Fi, local storage, remote upload, multiple-device networking and platform management. Network standards and platform functions depend on the project configuration.

Meets the needs of mobile deployment and on-site management

Specifications

Core Specifications

Multi-functional Rapid Poison Screening and Elimination Device

Processor speed

8 nuclear 2.0GHz

Screen size

5.0 inch screen

Screen resolution

1280*720

Touch screen

Multi-touch, Corning third-generation glass tempered screen

Camera

Front-mounted 5.0MP

Rear-mounted 13MP , Autofocus with flash

microphone head

Built-in 8 Omega /0.8W Waterproof speaker x 1

speaker

Built-in   Sensitivity: -42db, Output impedance 2.2k Omega

Biometric Module

Resolution

24bit

RMS Noise

<1µV ( 0.1-100Hz )

Input range

-150 mV to +150 mV

Input impedance

>1 G Omega

Common-mode rejection ratio CMRR

( @50-60Hz ) :100dB

Sampling rate

4096/2048/1024/512 or 4000/2000/1000/500Hz

Analog bandwidth

4kHz time DC to 800Hz

Second-generation ID card reader module

Standards and Specifications

compliant ISO/IEC 14443 Type B standards, as well as “ GA450-2013 General Technical Requirements for Desktop Resident Identity Card Readers,

《 GA467 Technical Specification for the Interface of the Security Control Module for Resident Identity Card Verification, GA/T1011-2012 Resident ID card fingerprint collection

General Technical Requirements for Collectors

Card reading time

<1s

Reading distance

0-30mm

Effective Collection Window

15.2*20.3mm

Image size

300*400pixel

Image resolution

500dpi

Operating frequency

13.56MHZ ± 7KHZ ( fc )

Antenna energy

Electromagnetic Field Strength on the Antenna Surface (Hmx ) ≤ 7.5A/m rms; Electromagnetic field strength in the direction of the antenna surface normal at the maximum reading distance

(Hmh) ≥ 1.5 A/m rms 。

Fingerprint sensor

Collection method

High precision ADC collection

Image Acquisition Time   

≤ 160ms

Resolution

508DPI

Collection Window Size

13.85mm × 18.90mm

Effective Collection Area

12.8mm × 18.0mm

Image size

256  × 360 pixel

Interface sensor

Gravity sensing

Built-in

Gyroscope

Built-in

Compass

Built-in

Proximity sensing

Built-in

Light sensitivity

Built-in

WIFI

WIFI 802.11(a/b/g/n) Frequency 2.4G+5.8G Dual-band WIFI

Bluetooth   BT

4.0(BLE)class1.5 Transmission distance :10m

4G/5G

GSM 、 WCDMA 、TD-SCDMA、LTE-FDD、LTE-TDD , All-Network Compatible

GPS/BDS

GPS 、 BD Select any

Machine Interface

SIM interface, TF Memory card slot, USB 3.0 , standard headphone jack, PogoPin 、TYPE-C Charging

External power supply

DC 5V Maximum current 1.5A

Physical parameters

Operating ambient temperature

-40 °℃~ +60 °C

Storage temperature

-45 °C~ +70 °C

Operating humidity

Humidity less than 90%( No condensation )

Power supply

Built-in lithium battery 3.7V/5000mAh

Battery life

Approximately 8 Hours (standby time > 300h )

External dimensions

178*83*24.6mm

Weight

Approximately 1200g

Equipped with accessories

Finger clip sensor

Collect finger data

Data Transmission Foundation

Supports charging and data transfer

Charging data cable

USB transfer type-c

charging plug

American standard / European standard

Instruction manual

A copy

Packaging

ABS Dedicated protective case (dimensions 380mm*220mm*120mm )

Click to view more Click to close more

Standard Package Contents

Content update in progress,...


Upon unpacking and use, the standard package includes the above accessories.

Inquiry about this product?

Obtain relevant technical support

Inquiry about this product?

Obtain relevant technical support

Contact Sales

We respect your privacy, and the information you submit will be used solely for this business communication.
We respect your privacy. The information submitted will only be used for this business inquiry.

Quick Contact

Quick contact

sales@settall.com

13001168699

Image Name

Download Materials

Data download

Related Videos

Related Videos