-
-
Bird Detection, Monitoring, and Deterrence System Solution
-
Portable Green Laser Bird-Repellent System Solution
-
Solution for Road Vehicle Overtemperature Warning System
-
SETTALL Low-Altitude Defense System Solution
-
Touchscreen Electronic Sandbox Solution
-
Ballistic tracking radar system solution
-
Multi-Functional Rapid Screening and Elimination Device Solution for Poisoned Individuals
-
Handheld Integrated Gas and Nuclear Radiation Detection Solution
-
Nuclear Radiation Imaging Solutions
-
-
Mountain Conservation and Monitoring System Solution
-
Super Video Investigation Individual Soldier System Solution
Solution
-
-
-
-
-
-
Multi-functional Rapid Poison Screening and Removal Device
Current model: SSK/NW-CI
Retail price
Market price
The MEG rapid drug‑testing device eliminates consumable waste and is easy to operate: after powering on, simply connect the finger clip to the main unit; the test subject places the clip on their middle finger, and the SQUID sensor at the front of the device is gently pressed against the subject’s forehead for 7–12 seconds to deliver results, determining whether the individual has used drugs or prohibited substances.
Remaining inventory
0
隐藏域元素占位
Product overview
Portable detection terminal for rapid on-site screening and triage
The SSK/NW-CI multi‑functional rapid post‑exposure screening and triage device utilizes SQUID sensors to acquire relevant signals and, through the coordinated use of a middle‑finger finger clip and a forehead sensor, enables on‑site rapid screening. After the subject wears the finger clip, simply bringing the device’s front‑end sensor close to the forehead completes data acquisition and provides auxiliary diagnostic support.
The device requires no test strips, test cards, or other conventional consumables, making it ideal for scenarios that demand rapid screening, identity linking, and data retention—such as mobile law enforcement by public security agencies, special‑purpose facilities, schools, hospitals, routine inspections, and drug‑rehabilitation monitoring.
Multi-functional Rapid Poison Screening and Elimination Device
Non-invasive rapid screening, identity linkage, and on-site data retention
Core capabilities
Six capabilities support continuous on-site screening.
Organize core capabilities around testing efficiency, non-invasive sample collection, mobile deployment, and information management.
Complete screening quickly
A single-person screening takes approximately 8–15 seconds, making it suitable for continuous personnel screening tasks.
No routine consumables required.
No disposable conventional testing consumables such as test strips or test cards are required.
Non-invasive signal acquisition
No need to collect biological samples such as urine or saliva, simplifying on-site procedures.
Identity Information Association
Supports the collection and association of second-generation ID card data, fingerprints, and facial information.
Mobile Deployment
Built-in lithium battery, ideal for mobile inspections and on-site law enforcement.
Networking and Platform Management
Supports 4G, 5G, Wi‑Fi, multi‑device networking, cloud‑based data upload, and blacklist registration.
Screening workflow
Four steps to complete on-site rapid screening
From finger‑clip attachment to result display, the workflow is clear and easy for frontline staff to master quickly.
01
Wear the finger clip.
Place the device’s finger clip on the middle finger of the subject.
02
Forehead detection
Simply touch the forehead, and the device will automatically complete the measurement.
03
Data Collection
The system automatically performs the relevant signal acquisition and analysis.
04
The results show
The device displays on-site screening results in real time.
Application scenarios
Typical application scenarios
Designed for on-site screening tasks such as mobile law enforcement and the management of key locations and personnel.
Public Security Mobile Law Enforcement
Supports on-site rapid troubleshooting and identity information linkage.
Rapid testing for special venues
Suitable for rapid screening and information retention of key personnel.
School
Used for rapid contact tracing among campus personnel.
Hospital
Rapid auxiliary screening for medical settings.
Inspection Site
Meets the requirements of mobile inspections and continuous on-site operations.
Drug Rehabilitation Management Spot Check
Supports random inspections, oversight, and filing by the administrative authorities.
Comparison
Compared with conventional rapid drug testing methods
A comparative analysis is conducted across on-site testing efficiency, sample collection, and digital management capabilities.
Testing Efficiency and Methods
| Comparison Items | SSK/NW-CI | Routine rapid drug testing |
|---|---|---|
| Detection method | Rapid screening of the forehead region | Urine / Saliva Sampling |
| Solo time | 8–15 seconds | Usually a few minutes |
| Disposable consumables | No routine consumables required. | Test strips or test cards are required. |
| Sample Collection | No urine or saliva sampling required. | Biological samples need to be collected. |
Digitalization and Management Capabilities
| Comparison Items | SSK/NW-CI | Routine rapid drug testing |
|---|---|---|
| Identity verification | Second-generation ID card + fingerprint + facial recognition | Usually none |
| Data storage | Local storage | Heavily reliant on manual recording. |
| Data Networking | 4G / 5G / Wi-Fi | Usually requires additional equipment. |
| Platform Management | Multi-Unit Networking / Cloud Upload | Usually relies on additional systems. |
Technical specifications
Technical Specifications
The parameters have been compiled in accordance with the product manual, and the descriptions of the microphone and speaker have been swapped and corrected based on the confirmed results.
Host and Display
| Processor | 8 cores, 2.0 GHz |
|---|---|
| Screen | 5.0 inches, 1280×720, multi-touch, Corning third-generation tempered glass |
| Front-facing camera | 5.0MP |
| Rear camera | 13MP, autofocus, with flash |
| Microphone head | Sensitivity: −42 dB, Output Impedance: 2.2 kΩ |
| Speaker | Built-in 8Ω / 0.8W waterproof speaker ×1 |
Signal Acquisition and Identity Recognition
| Resolution | 24bit |
|---|---|
| RMS noise | <1 µV (0.1–100 Hz) |
| Input and Impedance | −150 mV to +150 mV; input impedance > 1 GΩ |
| Common-mode rejection ratio | 100 dB (@ 50–60 Hz) |
| Sampling rate | 4096/2048/1024/512 or 4000/2000/1000/500 Hz |
| Analog bandwidth | DC to 800 Hz at 4 kHz |
Credentials and Fingerprint Module
| Second-generation ID card standard | ISO/IEC 14443 Type B; compliant with GA450-2013, GA467, and GA/T1011-2012. |
|---|---|
| Card reading time | <1 second |
| Reading distance | 0–30mm |
| Document Collection Window | 15.2×20.3mm, 300×400 pixels, 500 dpi |
| Fingerprint Collection | High-precision ADC, acquisition time ≤ 160 ms, 508 DPI |
| Fingerprint window | 13.85×18.90 mm, effective area 12.8×18.0 mm, 256×360 pixels |
Communication, Interfaces, and Sensors
| Wi-Fi | 802.11 a/b/g/n, dual-band 2.4G + 5.8G |
|---|---|
| Bluetooth | BT 4.0 BLE, with a transmission range of approximately 10 meters. |
| Mobile network | GSM, WCDMA, TD-SCDMA, LTE-FDD, LTE-TDD, all-network compatibility |
| Positioning | GPS / BeiDou optional |
| Sensor | Gravity, gyroscope, compass, distance, ambient light sensor |
| Interface | SIM, TF, USB 3.0, headphone jack, Pogo Pin, Type-C |
Environment, Power Supply, and Structure
| Operating temperature | −40℃ to +60℃ |
|---|---|
| Storage temperature | −45℃ to +70℃ |
| Operating humidity | <90% RH, no condensation |
| Battery | Built-in lithium battery 3.7V / 5000mAh |
| Battery life | Approximately 8 hours; standby time > 300 hours. |
| External power supply | DC 5V, maximum current 1.5A |
Standards and Instructions
| Size | 178×83×24.6mm |
|---|---|
| Weight | Approximately 1200g |
| Operating frequency | 13.56 MHz ±7 kHz (fc) |
| Antenna energy | Surface field strength Hmx ≤ 7.5 A/m rms; at the maximum reading distance, Hmh ≥ 1.5 A/m rms. |
| Screening purposes | For on-site rapid screening and auxiliary diagnosis. |
| Configuration Instructions | The communication, positioning, and identity modules shall be subject to the final technical agreement. |
Note: The content on this page is compiled based on the current product manual; specific configurations, interfaces, and accessories shall be subject to the mutually confirmed technical agreement and delivery list.
Standard package
Standard configuration
The host, data acquisition, power supply, transmission, and portable components are integrated into a unified configuration, meeting the requirements of field deployment.
FAQ
Frequently Asked Questions
How long does it take for one person to complete an on-site screening?
The instruction manual states that each screening takes approximately 8–15 seconds; however, the actual procedure time may also be affected by identity registration and on-site workflow.
Do you need urine, saliva, or a single-use test strip?
The device employs fingertip and forehead sensors to acquire relevant physiological signals, eliminating the need for conventional urine or saliva sampling, as well as for standard consumables such as test strips or test cards.
Can the test data be linked to personnel identities?
The device supports the capture of second-generation ID cards, fingerprints, and facial data, and can link identities to test records. Specific functionalities are subject to the final configuration.
Does it support network connectivity and remote management?
Supports 4G, 5G, dual-band Wi‑Fi, local storage, remote uploading, multi‑device networking, and platform management; specific network standards and platform features are subject to the project configuration.
Meets the needs of mobile deployment and on-site management.
Specifications
Core Specifications
Multi-functional Rapid Poison Screening and Elimination Device | |
Processor speed | 8 Nuclear 2.0GHz |
Screen size | 5.0 Inch screen |
Screen resolution | 1280*720 |
Touch screen | Multi-touch, Corning third-generation glass tempered screen |
Camera | Front-mounted 5.0MP |
Rear-mounted 13MP , Autofocus with flash | |
Microphone head | Built-in 8 Omega /0.8W Waterproof speaker x 1 |
Speaker | Built-in Sensitivity: -42 dB, Output impedance 2.2k Omega |
Biometric Module | |
Resolution | 24bit |
RMS Noise | <1µV ( 0.1-100Hz ) |
Input range | -150 mV To +150 mV |
Input impedance | >1 G Omega |
Common-mode rejection ratio CMRR | ( @50-60Hz ) :100dB |
Sampling rate | 4096/2048/1024/512 or 4000/2000/1000/500Hz |
Analog bandwidth | 4kHz Time DC To 800Hz |
Second-generation ID card reading module | |
Standards and specifications | Compliant with ISO/IEC 14443 Type B Standards, as well as “ GA450-2013 General Technical Requirements for Desktop Resident Identity Card Readers, 《 GA467 Technical Specification for the Interface of the Security Control Module for Resident Identity Card Verification, GA/T1011-2012 Resident ID card fingerprint collection General Technical Requirements for Collectors |
Card reading time | <1s |
Reading distance | 0-30mm |
Effective Collection Window | 15.2*20.3mm |
Image size | 300*400 pixels |
Image resolution | 500dpi |
Operating frequency | 13.56MHZ ± 7KHZ ( fc ) |
Antenna energy | Electromagnetic Field Strength on the Antenna Surface (Hmx ) ≤ 7.5 A/m rms; Electromagnetic field strength at the maximum reading distance in the direction of the antenna’s surface normal. (Hmh) ≥ 1.5 A/m rms 。 |
Fingerprint sensor | |
Collection method | High precision ADC Collection |
Image Acquisition Time | ≤ 160ms |
Resolution | 508DPI |
Collection window size | 13.85mm × 18.90mm |
Effective Collection Area | 12.8mm × 18.0mm |
Image size | 256 × 360 pixel |
Interface sensor | |
Gravity sensing | Built-in |
Gyroscope | Built-in |
Compass | Built-in |
Proximity sensing | Built-in |
Light sensitivity | Built-in |
Wi-Fi | WIFI 802.11(a/b/g/n) Frequency 2.4G+5.8G Dual-band Wi-Fi |
Bluetooth BT | 4.0(BLE)class1.5 Transmission distance :10m |
4G/5G | GSM 、 WCDMA 、TD-SCDMA、LTE-FDD、LTE-TDD , All-Network Compatible |
GPS/BDS | GPS 、 BD Choose any |
Machine interface | SIM Interface, TF Memory card slot, USB 3.0 , standard headphone jack, PogoPin 、TYPE-C Charging |
External power supply | DC 5V Maximum current 1.5A |
Physical parameters | |
Operating ambient temperature | -40 °℃～ +60 °C |
Storage temperature | -45 °C～ +70 °C |
Operating humidity | Humidity less than 90%( No condensation ) |
Power supply | Built-in lithium battery 3.7V/5000mAh |
Battery life | Approximately 8 Hours (standby time > 300h ) |
Appearance dimensions | 178*83*24.6mm |
Weight | Approximately 1200g |
Equipped with accessories | |
Finger clip sensor | Collect finger data |
Data Transmission Foundation | Supports charging and data transfer |
Charging data cable | USB Turn type-c |
Charging plug | American standard / European standard |
Instruction manual | A copy |
Packaging | ABS Dedicated protective case (dimensions 380mm*220mm*120mm ) |
Standard Package Contents
Content update in progress,...
Upon unpacking and use, the standard package includes the above accessories.
Inquiry about this product?
Obtain relevant technical support
Quick Contact
Quick contact
sales@settall.com
13001168699
Download Materials
Data download
Related Videos
Related Videos
Contact
EMAIL:Guojin@settall.com
8th Floor, Building 14, Zone 7, Headquarters Base, West Outer Ring Road, Fengtai District, Beijing
